The largest database of trusted experimental protocols

7 protocols using anti cd10

1

Measuring Antigen Extraction and Trafficking in Cells

Check if the same lab product or an alternative is used in the 5 most similar protocols
To measure antigen extraction, PMSs containing either fluorescently labeled anti-human Igκ (GeneTex) or anti-rat Igκ (Thermo Fisher) were prepared as described (44 (link)). Cells were harvested and stained with near-IR Live/Dead marker (Thermo Fisher), anti-IgD Fab (SouthernBiotech), anti-CD10 (BD Biosciences), and the signal was quantified by flow cytometry (BD LSR II). To measure antigen trafficking, cells were placed on PMSs containing DyLight 550 and pHrodo avidin (Thermo Fisher) conjugated goat F(ab’)2 anti-human Igκ (SouthernBiotech) and anti-human Igλ (SouthernBiotech) as described above. Cells were harvested, stained with near-IR Live/Dead marker (Thermo Fisher), anti-IgD Fab (SouthernBiotech), anti-CD10 (BD Biosciences), and the signal was quantified by flow cytometry (BD LSR II).
+ Open protocol
+ Expand
2

Isolation and Characterization of Human Mammary Epithelial Cells

Check if the same lab product or an alternative is used in the 5 most similar protocols
Normal human mammary epithelial cells (MECs) were isolated from reduction mammoplasty specimens, and the resulting epithelial organoids were grown in matrix-embedded culture, as described previously [19 (link), 56 (link)]. After 9 days of culture, the acini were harvested, dissociated [20 (link)] and stained with specific cell markers. For MUC1/CD10 cell sorting experiments, single primary MECs from 3D cultures were stained with anti-MUC1 conjugated with fluorescein isothiocyanate (FITC; BD Biosciences) and anti-CD10 conjugated with phycoerythrin (PE; BD Biosciences). Single primary MECs were also sorted into subfractions on the basis of EpCAM, CD49f, CD10, MUC1, Thy1 and CD133, as described in [20 (link)]. For all flow cytometry experiments, forward scatter and side scatter plots were used to account for debris and aggregated cells. Single stained samples were used as compensation controls, and control samples consisted of unstained cells and/or IgG antibodies directly conjugated with FITC and PE (BD Biosciences). Cells were sorted on a FACSAria III cell sorter (BD Biosciences) in the Flow Cytometry Centre at the Westmead Millennium Institute. Analysis was performed using FACS Diva software (v6.1.2, BD Biosciences).
+ Open protocol
+ Expand
3

Immunophenotyping of RT-DLBCL cells

Check if the same lab product or an alternative is used in the 5 most similar protocols
To determine the immunophenotype of the RT-DLBCL cells, HPRT3, HPRT2, and HPRT1 cells were harvested from NSG mice. Cells were suspended in 100 µL of 0.5% BSA/PBS and stained with fluorophore-conjugated anti-CD19, anti-CD5, anti-CD10, anti-CD20, anti-CD23, anti-PD-1 or IgG-isotype controls (BD Biosciences, San Jose, CA). Percent expression of each cell surface marker is reported relative to the respective IgG isotype control.
+ Open protocol
+ Expand
4

Isolation and Characterization of Stem-like Cells

Check if the same lab product or an alternative is used in the 5 most similar protocols
Trypsinized cells were filtered using 5 ml polystyrene round-bottom tumor with cell strainer caps (BD Pharmingen). Single cell suspensions of 2×106 cells/ml were prepared and incubated with 5 μl Aldefluor® substrate (BAA), or 5 μl of the inhibitor diethylaminobenzaldehyde (DEAB) for 40 minutes at 37°C, using the Aldefluor kit (StemCell; Vancouver, Canada). Cells were exposed to anti-CD44 (APC-Cat #559942, PE-Cat #550989), anti-CD24 (FITC-Cat #555427; BD Pharmingen), or anti-CD10 (APC-Cat #340923; BD Pharmingen) for 30 minutes at 4°C. Positive anti-HLA-ABC (PE-Cat #560168; BD Pharmingen) was used to separate human cells from mouse cells, and 7-AAD (Cat #00-6993-50; eBiosciences) staining was used to verify cell viability.
+ Open protocol
+ Expand
5

Immunophenotyping of Stem Cells

Check if the same lab product or an alternative is used in the 5 most similar protocols
The following PE-labeled or unlabeled antibodies were used (secondary antibody: PE-conjugated goat anti-mouse Ig [BD Bioscience, San Jose, CA, USA]): anti-CD10, −CD14, −CD19, −CD29, −CD34, −CD43, −CD44, −CD45, −CD59, −CD71, −CD73, −CD90, −CD105, −CD106, −CD119, −CD130, −CD140a, −CD140b, −CD146, −CD166, −GD2 (BD Biosciences); -CD133, -CD271 (Miltenyi Biotec, Bergisch Gladbach, Germany); and –MSCA-1 (TNAP) (BioLegend, San Diego, CA, USA). PE-conjugated or non-labeled IgG1 and IgG2a antibodies (BD Bioscience) were used as isotype matched controls. Flow cytometry was performed with a FACScan instrument (BD, Franklin Lakes, NJ, USA) and BD CellQuest Pro software. Dead cells were identified by uptake of 7-Aminoactinomycin D. FlowJo-7.2.5 software (Tree Star, Ashland, OR, USA) was used for analysis.
+ Open protocol
+ Expand
6

Characterization of Cell Surface Markers

Check if the same lab product or an alternative is used in the 5 most similar protocols
The following fluorescein (FITC)-, allophycocyanin (APC)-or phycoerythrin (PE)-conjugated mouse anti-human monoclonal antibodies (mAbs) were used: Anti-CD10, -CD11a, CD11c, -CD18, -CD33, -CD40, -CDD44std, -CD44v5, -CD44v6, -CD54, -CD61, -CD62P, -CD86, -CD133, -CD206 (MR), -EGFR, -Her-2/neu, -HLA-DR, HLA class I, -CCR5, -CCR6, Her-2/neu all from BD Pharmingen (San Diego, CA, USA); anti-CD29, -CD36, -CD51, -CD58 from Immunotech (Marseille, France); anti-c-MET, -CCR1, -CCR2, -CCR3, -CCR7, -CXCR1, -CXCR2, -CXCR4 from R&D (Abington, UK); anti-Tag72, -Mucin1 (EMA, CD227), -EMMPRIN from Santa Cruz Biotechnology, Inc. (Santa Cruz, CA, USA) and anti-Epithelial Antigen, -Epithelial Membrane Antigen (EMA) from DAKO (Heverlee, Belgium). Isotype controls included appropriate FITC-, APC- or PE-labeled mouse IgG1, IgG2a or IgG2b. Cells were incubated with mAbs or isotype controls for 20 min at 4°C, washed, resuspended in PBS and analyzed by flow cytometry (FACS Canto; BD Biosciences Immunocytometry Systems, San Jose, CA, USA) using FACS DiVa software.
+ Open protocol
+ Expand
7

Activated Human Tonsil B Cell Profiling

Check if the same lab product or an alternative is used in the 5 most similar protocols
Purified tonsil B cells from three different individuals were incubated at 37°C for 2 h with 10ug/ml of goat F(ab’)2 anti-human Igκ (SouthernBiotech) and anti-human Igλ (SouthernBiotech). Cells were then washed, stained with Live/Dead marker (Thermo Fisher), anti-CD19 (Biolegend), anti-IgD (Miltenyi), anti-CD10 (BD Biosciences), and anti-CD184 (BD Biosciences) and barcoded as described (45 (link)). Cells were washed, combined and further stained for surface markers using a LEGENDScreen (Biolegend) human cell screening kit. Fluorescent signals were quantified by flow cytometry (BD LSR II). Flow cytometry data was analyzed with FlowJo v.10.1 and Microsoft Excel 2016.
+ Open protocol
+ Expand

About PubCompare

Our mission is to provide scientists with the largest repository of trustworthy protocols and intelligent analytical tools, thereby offering them extensive information to design robust protocols aimed at minimizing the risk of failures.

We believe that the most crucial aspect is to grant scientists access to a wide range of reliable sources and new useful tools that surpass human capabilities.

However, we trust in allowing scientists to determine how to construct their own protocols based on this information, as they are the experts in their field.

Ready to get started?

Sign up for free.
Registration takes 20 seconds.
Available from any computer
No download required

Sign up now

Revolutionizing how scientists
search and build protocols!