The largest database of trusted experimental protocols

140 protocols using ethyl acetate

1

Determination of TCPP Isomers in Soil

Check if the same lab product or an alternative is used in the 5 most similar protocols
The TCPP (C9H18Cl3PO4, ≥98% purity) was purchased from Shanghai Rhawn Technology Development (Shanghai, China) . This product contains two isomers (Fig. S1 and Table S1): tri(chloro-isopropyl) phosphate and bis-(1-chloro-2-propyl) (3chloro-1-propyl) phosphate, referred to here as TCPP 1 and TCPP 2 , respectively. Iron powder (100 mesh) was obtained from Shanghai Macklin Biochemical (Shanghai, China). Potassium persulphate (K2S2O8, ≥98% purity) and the solvents (methanol, ethyl acetate and absolute ethanol) used in the gas chromatography-mass spectrometry (GC-MS) analyses were all purchased from Sinopharm Chemical Reagent (Shanghai, China).
ethyl acetate was purchased from Sinopharm Chemical Reagent Co., Ltd., Shanghai, China. All other chemical reagents and organic solvents were of analytical-reagent grade.
Three soils were collected from Liaoning (red soil), Jiangsu (yellow soil) and Heilongjiang (black soil) in China, respectively. All the soils were air-dried for one week ground and passed through a 1-mm mesh screen. The selected soil was stored at 4 ℃ and used as natural soil.
+ Open protocol
+ Expand
2

Analytical Grade Reagent Preparation

Check if the same lab product or an alternative is used in the 5 most similar protocols
Methanol, acetonitrile and formic acid were supplied by the Merck Company (Shanghai, China), and ammonium acetate was purchased from Sigma-Aldrich (Shanghai, China), all of them were of high performance liquid chromatography (HPLC) grade. Other reagents used in this study were analytical grade, including ethanol absolute, ethyl acetate, glacial acetic acid, ethyl acetate, and trichloroacetic acid (Sinopharm Chemical Reagent Co., ltd., Shanghai, China).
+ Open protocol
+ Expand
3

Synthesis of Lead Halide Perovskite Nanocrystals

Check if the same lab product or an alternative is used in the 5 most similar protocols
Cs2CO3 (cesium carbonate, 99.9%), PbBr2 (lead bromide, 99.0%), ODE (90%), OA (90%), OLA (90%), DGBE (99.0%), MnCl2·4H2O (manganese chloride tetrahydrate, 99.0%), MnBr2·4H2O (manganese bromide hydrate, 98.0%), MnSO4·H2O (manganese sulfate monohydrate, 99.0%), C4H6MnO4·4H2O (manganese acetate tetrahydrate, 99.0%), and C10H14MnO4 (manganese acetylacetonate, 99.5%) were purchased from Shanghai Makclin Biochemical Co., Ltd. (Shanghai, China). Cyclohexane (99.7%) and ethyl acetate (99.5%) were purchased from China National Pharmaceutical Group Corporation (Beijing, China).
+ Open protocol
+ Expand
4

Phytochemical Extraction and Analysis

Check if the same lab product or an alternative is used in the 5 most similar protocols
GA3, Tween-20, N-(3-dimethylaminopropyl)-N0-ethylcarbodiimide (EDC) were purchased from Sigma-Aldrich (St. Louis, MO, USA). Standard compound theanine, uniconazole, were purchased from Solarbio Science & Technology (Beijing, China). Phosphoric acid (Hromatographic grade), methanol (MeOH), formic acid (FA), acetone, ethanol (EtOH) and ethyl acetate were purchased from China National Pharmaceutical Group (Shanghai, China). Acetonitrile (Hromatographic grade) was purchased from TEDIA Company (Fairfield, OH, USA).
+ Open protocol
+ Expand
5

Characterization of Royal Jelly Fatty Acids

Check if the same lab product or an alternative is used in the 5 most similar protocols
RJSR with more than 70% 10-HDA was supplied by Zhejiang Jiangshan Health Bee Enterprise Co. Ltd. (Jiangshan, China). GE, AG, and the standard chemicals (10-HDA and methyl 4-hydroxybenzoate) for High performance liquid chromatography (HPLC) were purchased from Shanghai Yuanye Biotechnology Co., Ltd. (Shanghai, China). Enzymes (pepsin, pancreatin, and transglutaminase) were purchased from Sinopharm Chemical Reagent Co. Ltd. (Shanghai, China). HPLC-grade methanol, ethanol, and ethyl acetate and analytically pure hydrochloric acid, NaOH, acetic acid, NaCl, KH 2 PO 4 , and anhydrous sodium sulfate were purchased from China National Pharmaceutical Group Co., Ltd. (Beijing, China).
+ Open protocol
+ Expand
6

Synthesis of Cesium Lead Bromide Perovskites

Check if the same lab product or an alternative is used in the 5 most similar protocols
Cesium bromide (CsBr, 99.5% metals basis), lead(ii) bromide (PbBr2, AR, 99.0%), oleylamine (OM, 80–90%) and dimethyl sulfoxide (DMSO) were purchased from Aladdin®. Ethyl acetate (EA), n-hexane (n-H), oleic acid (OA, AR), absolute ethanol and acetone were purchased from Sinopharm Chemical Reagent. All reagents were used as received without any further purification.
+ Open protocol
+ Expand
7

Synthesis of Metal-Organic Frameworks

Check if the same lab product or an alternative is used in the 5 most similar protocols
All solvents and chemicals used in this research were commercial products. Ethanol, N, N−dimethylformamide (DMF), mEthanol, chloroform, ethyl acetate, acetone, acetonitrile, zinc chloride (ZnCl2), p−benzenedicarboylic acid (p−H2BDC), propylene carbonate (PC), Ethanol, lithium perchlorate (LiClO4) and potassium carbonate were purchased from Sinopharm Chemical reagent Co. Ltd. (Shanghai, China), 2,5−Dibromoanisole, 4−pyridineboronic acid, (beta−4)−platinum and tris(dibenzylideneacetone)dipalladium(0), 4−Bromomethylbenzoic acid, and 1,4−Dioxane were bought from Energy Chemical (Shanghai, China).
+ Open protocol
+ Expand
8

Corrosion Resistance of X60-Steel

Check if the same lab product or an alternative is used in the 5 most similar protocols
X60-steel samples were applied to investigate the necessitated measurements, in which the metal composition in wt.% was found as follows: C, 0.23; Si, 0.38; Mn, 1.41; V, 0.06; Nb, 0.05; Ti, 0.04; P, 0.025; S, 0.015, and remainder Fe. The X60-steel samples were scratched with various SiC sheets (grades 400–1800), and acetone was used for metal rinsing, cleaned by bidistilled water, and then slightly dehydrated before soaking. Hydrochloric acid (Analar grade: 1.0 M, 37%) served as the corrosive medium.
All required chemicals and solvents, such as tetrahydrofuran, ethyl acetate, and diethyl ether, may be utilized with no need for purification and were obtained from Sinopharm Chemical Reagent Co., Ltd., Beijing, China. N1,N1-dimethylpropane-1,3-diamine (≥99.0%) and Perfluoro-1-hexane sulfonyl fluoride (≥98.0%) were obtained from “Aladdin Industrial corporation” company, Shanghai, China. 1,2-Diiodoethane (≥95.0%), 1,4-diiodobutane (≥97.0%), and 1,6-diiodohexane (≥99.0%) were obtained from Alfa Aesar China Co., Ltd., Shanghai, China. 1H (600 MHz), 13C (151 MHz), and 19F NMR (565 MHz) NMR spectra were obtained in CD3OD, DMSO-d6, or CDCl3 on a “Bruker AVANCE instrument” by using the inner standard as tetramethylsilane, ≥99.0%.
+ Open protocol
+ Expand
9

Cracking of LDPE via Zeolites

Check if the same lab product or an alternative is used in the 5 most similar protocols
1,4-Cyclohexanedimethanol, 1,5-pentanediol, 2,2-dimethoxypropane, and p-toluene sulfonic acid (PTSA) were purchased from the Aladdin Reagent Company (Shanghai, China). Cyclohexane, ethyl acetate, triethylamine, and n-hexane were bought from Sinopharm Chemical Reagent Company (Shanghai, China) and distilled with calcium hydride. NaAlO2 (57.1% Al2O3 and 37.2% Na2O) and NaOH (96 wt%) were gained from Sinopharm Chemical Reagent Company (Shanghai, China) and fumed silica was obtained from the Shanghai Tengmin Industrial Company (Shanghai, China). Commercial H type ZSM-5 zeolite with a Si/Al molar ratio of 12, denoted as C-Z5, was acquired from Nankai University Catalyst Co., Ltd. (Tianjin, China). Low-density polyethylene (LDPE) powder used as a model feedstock in the cracking reaction was provided by Alfa Aesar (Stock #42607) (Tianjin, China).
+ Open protocol
+ Expand
10

Xinli No. 7 Fruit Phytochemical Analysis

Check if the same lab product or an alternative is used in the 5 most similar protocols
Xinli No. 7 (XL7) specimens were purchased from a supermarket in Weixian, Hebei Province when they reached the maturity of the respective commercial harvesting period and immediately stored at 4 °C after sampling for subsequent processing analysis. The fruits with diseases, mechanical damage, and immaturity were removed. Hydrochloric acid, sulfuric acid, methanol, anhydrous ethanol, ethyl acetate, zinc acetate, sodium carbonate, sodium bicarbonate, sodium nitrite, aluminium nitrate, sodium chloride, sodium hydroxide (analytically pure), sucrose, potassium ferricyanide, phenolphthalein, polyethylene glycol (PEG 6000, analytically pure), acetic acid–sodium acetate buffer solution (0.1 mol/L, pH = 5.5), Triton X–100, catechol, and potassium persulfate were purchased from Sinopharm Chemical Reagent Co., Ltd. (Beijing, China). Folinol (1 mol/L), gallic acid, rutin, 1,1-diphenyl-2-trinitrophenylhydrazine (DPPH), and 2,2′-diazo-di-3-ethylbenzothiazolin-6-sulfonic acid (ABTS) were bought from Soleibao Biotechnology Co., Ltd. (Shanghai, China).
+ Open protocol
+ Expand

About PubCompare

Our mission is to provide scientists with the largest repository of trustworthy protocols and intelligent analytical tools, thereby offering them extensive information to design robust protocols aimed at minimizing the risk of failures.

We believe that the most crucial aspect is to grant scientists access to a wide range of reliable sources and new useful tools that surpass human capabilities.

However, we trust in allowing scientists to determine how to construct their own protocols based on this information, as they are the experts in their field.

Ready to get started?

Sign up for free.
Registration takes 20 seconds.
Available from any computer
No download required

Sign up now

Revolutionizing how scientists
search and build protocols!