MMA, tBuMA, OEGMA475, and 4VP were purchased from Sigma-Aldrich (Weinheim, Germany), purified before use by passing through a basic alumina column to remove the inhibitor. 3-SPMA, METAC, 2-BiBB, 3-aminopropyltriethoxysilane (APTES), PMDETA (99%), dichloromethane (DCM, dry), DMSO, triethylamine (TEA), acetone (dry), and methanol (all from Sigma-Aldrich) were used as received. For reactions and water contact angle measurements, bidistilled deionized water was used. Cu plate (MicroChemicals GmbH, Germany): 1-side polished, p-type (boron), total-thickness-variation (TTV) < 10 µm, 1–10 Ohm cm; 10 nm Ti adhesion layer; 200 nm Cu (purity >99.9%), root-mean-square roughness <10 nm. The copper plate was consecutively washed with portions of 3 M HCl (in methanol), methanol and ethanol under ultrasonication (2 min), and dried under a flow of argon. The cleaned copper plate was immediately used for reactions.
Metac
Manufactured by Merck Group
METAC is a laboratory instrument manufactured by the Merck Group. It is designed for the analysis and measurement of various chemical and biological samples. The core function of METAC is to provide accurate and reliable data for scientific research and testing purposes.
Automatically generated - may contain errors
Lab products found in correlation
Methanol, by Merck Group (2 mentions)
Chitosan powder, by Merck Group (1 mentions)
Cericammonium nitrate can, by Merck Group (1 mentions)
Hydrochloric acid (hcl), by Merck Group (1 mentions)
Acetic acid, by Merck Group (1 mentions)
Sulfuric acid, by Merck Group (1 mentions)
Sodium hydroxide pellet, by Merck Group (1 mentions)
2 protocols using metac
1
Polymer Brush Functionalization of Copper
2
Chitosan-Based Composite Synthesis
Check if the same lab product or an alternative is used in the 5 most similar protocols
+ Expand
Chitosan powder (with 75–85% degree
of deacetylation and 190 000–310 000 kg/mol molecular
weight) was obtained from Sigma-Aldrich. Also, METMS, METAC, ceric
ammonium nitrate (CAN), methanol, sodium hydroxide pellets, poly diallyldi
methylammonium, acetic acid (90 vol %), HCl (37%), sulfuric acid (98
wt %), and direct yellow 50 (Y50) dye were purchased from Sigma-Aldrich
company. Potassium polyvinyl sulfate (PVSK) (with molecular weight
of 200–300 kg/mol, 98.4% esterified) was provided by Wako Pure
Chemical Industries Ltd., Japan. Cellulose acetate dialysis membrane
(molecular weight cut-off of 1000 g/mol) was purchased from Wako Chemicals,
Japan. In this research work, no unexpected or unusually high safety
hazards were encountered.
of deacetylation and 190 000–310 000 kg/mol molecular
weight) was obtained from Sigma-Aldrich. Also, METMS, METAC, ceric
ammonium nitrate (CAN), methanol, sodium hydroxide pellets, poly diallyldi
methylammonium, acetic acid (90 vol %), HCl (37%), sulfuric acid (98
wt %), and direct yellow 50 (Y50) dye were purchased from Sigma-Aldrich
company. Potassium polyvinyl sulfate (PVSK) (with molecular weight
of 200–300 kg/mol, 98.4% esterified) was provided by Wako Pure
Chemical Industries Ltd., Japan. Cellulose acetate dialysis membrane
(molecular weight cut-off of 1000 g/mol) was purchased from Wako Chemicals,
Japan. In this research work, no unexpected or unusually high safety
hazards were encountered.
About PubCompare
Our mission is to provide scientists with the largest repository of trustworthy protocols and intelligent analytical tools, thereby offering them extensive information to design robust protocols aimed at minimizing the risk of failures.
We believe that the most crucial aspect is to grant scientists access to a wide range of reliable sources and new useful tools that surpass human capabilities.
However, we trust in allowing scientists to determine how to construct their own protocols based on this information, as they are the experts in their field.
Ready to get started?
Sign up for free.
Registration takes 20 seconds.
Available from any computer
No download required
Revolutionizing how scientists
search and build protocols!