The largest database of trusted experimental protocols

Moisturemeterd compact

Manufactured by Delfin Technologies
Sourced in Finland

The MoistureMeterD compact is a portable device designed to measure the moisture content in a variety of materials. It provides accurate and reliable measurements, making it a useful tool for various applications.

Automatically generated - may contain errors

5 protocols using moisturemeterd compact

1

Noninvasive Skin Biometrics Monitoring

Check if the same lab product or an alternative is used in the 5 most similar protocols
Skin pH was tested with the potentiometrically operating electrode Inlab Surface (Mettler Toledo GmbH, Giessen, Germany) measuring at an accuracy of ± 0.01. Skin moisture in percentage was measured with a MoistureMeterD compact (Delfin Technologies UK Ltd., Dorking, UK) with a measurement accuracy of ± 5%. The measuring principle is based on noninvasive detection of the tissue dielectric constant. Both instruments were in contact with the skin and especially the measurement of skin moisture needed contact pressure. Therefore, these measurements could have an influence on microcirculation parameters. Consequently, we measured these two parameters only before and after the experiment and thus chose a contact‐free infrared thermometer FT90 (Beurer medical GmbH, Ulm, Germany) at an accuracy of ± 2°C. In accordance with literature, there were no decisive temperature‐driven changes in blood flow under 35°C expected.40, 41 For this reason, we expected the accuracy was sufficient. The contact‐free measurement of skin temperature enabled this measurement during the experiment without an influence on microcirculation parameters. Data are provided as mean ± SD of all subjects (N = 10) per treatment duration and time of acquisition.
+ Open protocol
+ Expand
2

Measuring Limb Tissue Water Using TDC

Check if the same lab product or an alternative is used in the 5 most similar protocols
LTW was evaluated using the TDC method (MoistureMeterD Compact; Delfin Technologies LTD, Kuopio Finland). MoistureMeterD is a handheld noninvasive portable device that consists of an electronic control unit and an integrated probe that evaluates LTW to a depth of 2.5 mm (Lahtinen et al. 2015 (link)). Measurement depth is dependent on the dimensions of the device probe. Absolute TDC values decrease with increased depth of measurement. However, Mayrovitz reported that interlimb TDC ratios of affected to unaffected limbs were not significantly different across depths (Mayrovitz, Weingrad, and Lopez, 2015b (link)). Since the same device was used for all of the assessments, measurement depth was consistent across all of the sites and study participants. Using an interlimb TDC ratio of 1.2, the sensitivity and specificity was found to be 65% and 94%, respectively, using a diagnostic reference standard of ≥2 cm interlimb circumference difference (Bakar et al., 2018 (link)).
+ Open protocol
+ Expand
3

Skin Hydration and Barrier Function

Check if the same lab product or an alternative is used in the 5 most similar protocols
Skin moisture was measured locally on the anterior forearm 10 cm distal to the wrist using a MoistureMeter D Compact (Delfin Technologies, Ltd., Kuopio, Finland), which measures the skin tissue dielectric constant noninvasively and converts it within seconds into a % skin water content on a scale from 0% to 100%. An increase in the measured value indicates an improvement in skin moisture. TEWL from the forearm was measured using a vapometer (SWL4001, Delfin Technologies Ltd., Kuopio, Finland), which harbors a humidity sensor in a cylindrical measurement chamber that records changes in relative humidity inside the chamber during the measurement and automatically calculates TEWL (g/m2h). A decrease in the measured value indicates an improvement in TEWL. All skin moisture and TEWL measurements were performed three times at each visit, and the average values were used for skin hydration analysis.
+ Open protocol
+ Expand
4

Skin Hydration Measurement Techniques

Check if the same lab product or an alternative is used in the 5 most similar protocols
Skin hydration was measured at 0, 4, and 8 weeks using the Corneometer CM825 (Courage&Khazaka electronic GmbH). The Corneometer numerically displays skin capacitance at 30-40 μm below the stratum corneum, indicating hydration through the insulating ions remaining in the probe head (A.U.). Dermal hydration was measured using Moisturemeter D Compact (Delfin Technologies Ltd., Kuopio, Finland), which utilizes a 265 MHz high-frequency electromagnetic field to penetrate to a depth of 2 to 2.5 mm in the skin, measuring the tissue dielectric constant in terms of moisture content (%).
+ Open protocol
+ Expand
5

Evaluating Tissue Water Content using MoistureMeterD

Check if the same lab product or an alternative is used in the 5 most similar protocols
The local tissue water was evaluated by the MoistureMeterD and MoistureMeterD compact (MMDC) (Delfin Technologies Ltd., Kuopio, Finland). A low-intensity 300MHz signal is transmitted from the probe in contact with the skin. Based on information from the reflected wave, a tissue dielectric constant value is calculated. The probe has a penetration depth of 2.5 mm and corresponds to a maximum of 78.5% of pure water content based on the percentage of water content in the body. The presented tissue dielectric constant ratios are approximately the same as the new device MMDC, corresponding to a maximum of 100% pure water content based on a 100% scale [34 (link)]. Each site was measured once [35 (link)] at six points: 5 cm proximal and 5 cm distal to the antecubital fossa (medial, frontal, and lateral). If lymphedema was palpated more proximally or distally in the arm, complementary measurements were made 15 cm proximal or distal to the antecubital fossa. A significant positive correlation between arm tissue dielectric constant ratios and arm volume (p < 0.001, r = 0.690) has been reported [36 (link)].
+ Open protocol
+ Expand

About PubCompare

Our mission is to provide scientists with the largest repository of trustworthy protocols and intelligent analytical tools, thereby offering them extensive information to design robust protocols aimed at minimizing the risk of failures.

We believe that the most crucial aspect is to grant scientists access to a wide range of reliable sources and new useful tools that surpass human capabilities.

However, we trust in allowing scientists to determine how to construct their own protocols based on this information, as they are the experts in their field.

Ready to get started?

Sign up for free.
Registration takes 20 seconds.
Available from any computer
No download required

Sign up now

Revolutionizing how scientists
search and build protocols!