A Siemens Magnetom Trio Tim 3.0-T superconducting MRI scanner with an 18-channel phased-array torso coil was used to create all magnetic resonance images [repetition time (TR) 400 ms, echo time (TE) 80 ms, slice thickness = 3 mm, interslice gap = 30%, acquisition four times with fat-suppression technique]. T2-weighted images in the sagittal, coronal, and transverse planes, diffusion-weighted images, apparent diffusion coefficient in the transverse plane, and dynamic contrast-enhanced images were acquired according to the international prostate MRI guidelines (15 (link)). Interpretation of the MRI findings was performed by a radiologist and a urologist (with 5 or more years of experience in prostate imaging),who measured PA and CGA on fat-saturated T2WI MRI (Figure S1
Magnetom trio tim 3.0 t
Manufactured by Siemens
Sourced in Germany
The Magnetom Trio Tim 3.0-T is a magnetic resonance imaging (MRI) system produced by Siemens. It operates at a magnetic field strength of 3.0 Tesla, which is used for diagnostic imaging purposes.
Automatically generated - may contain errors
4 protocols using magnetom trio tim 3.0 t
1
Multiparametric MRI Evaluation of Prostate
2
In Vitro MRI and CT Imaging of FePt NPs
Check if the same lab product or an alternative is used in the 5 most similar protocols
+ Expand
A column of centrifuge tubes which contained 0.01–100 mmol/L FePt NPs and a phosphate buffer saline (PBS) control was used for MRI and CT contrast imaging. T2-weighted three-dimensional spin echo sequences for in vitro MRI (MAGNETOM Trio Tim 3.0T, Siemens, Munich, Bavaria, Germany) were performed at the Hospital of Wuhan University, Wuhan, Hubei, People’s Republic of China, and used the following parameters: a repetition time of 550 milliseconds, an echo time of 15 milliseconds, a flip angle of 15°, a slice thickness of 1.5 mm, and a matrix of 256×196 pixels. The CT imaging (Sensation Cardiac 64x, Siemens, Munich, Bavaria, Germany) parameters were as follows: slice thickness, 3 mm; 120 kvp, 80 mA; filed, 512×512; gantry rotation time, 0.3 second; table speed, 30 mm/rotation.
3
Carotid Plaque Characterization by MRI
Check if the same lab product or an alternative is used in the 5 most similar protocols
+ Expand
Magnetom Trio Tim 3.0T (Siemens Medical Systems, Erlangen, Germany) was used to perform carotid high-resolution MRI examination of enrolled patients. Patients were divided into vulnerable and stable plaque group according to the characteristics of plaque. Vulnerable plaques are defined as those with intraplaque hemorrhage and/or plaque surface defects, such as disrupted luminal surface, ulceration, or mural thrombosis.
4
Multimodal Imaging of Vascular Niduses
Check if the same lab product or an alternative is used in the 5 most similar protocols
+ Expand
Plain-film radiography and whole-body bone scintigraphy (WBBS) were performed in 31 and 13 cases, respectively. WBBS was performed with a delay of 3 h after the administration of the intravenous contrast medium, 99mTc-methylene diphosphonate (99mTc-MDP).
Plain CT scans, which were available for all cases (n = 35), had been performed with a 3-mm section thickness and 3-mm reconstruction interval. CT scans were obtained with one of the following commercially available devices: General Electric (GE) LightSpeed VCT, GE Discovery CT750 HD, Siemens Somatom, or Siemens Somatom Definition Flash.
MRI scans were obtained in 32 patients (34 niduses), with one of the following commercially available devices: GE Signa HDXT, GE Discovery MR 750, Siemens Sonata, or Siemens Magnetom Trio Tim 3.0 T. MRI sequences included T1-weighted images (T1WI, n = 32), T2-weighted images (T2WI, n = 32), and fat-suppressed T2-weighted images (FS T2WI, n = 32). For 17 patients (18 niduses), gadolinium contrast-enhanced FS T1WI sequences were available.
Plain CT scans, which were available for all cases (n = 35), had been performed with a 3-mm section thickness and 3-mm reconstruction interval. CT scans were obtained with one of the following commercially available devices: General Electric (GE) LightSpeed VCT, GE Discovery CT750 HD, Siemens Somatom, or Siemens Somatom Definition Flash.
MRI scans were obtained in 32 patients (34 niduses), with one of the following commercially available devices: GE Signa HDXT, GE Discovery MR 750, Siemens Sonata, or Siemens Magnetom Trio Tim 3.0 T. MRI sequences included T1-weighted images (T1WI, n = 32), T2-weighted images (T2WI, n = 32), and fat-suppressed T2-weighted images (FS T2WI, n = 32). For 17 patients (18 niduses), gadolinium contrast-enhanced FS T1WI sequences were available.
About PubCompare
Our mission is to provide scientists with the largest repository of trustworthy protocols and intelligent analytical tools, thereby offering them extensive information to design robust protocols aimed at minimizing the risk of failures.
We believe that the most crucial aspect is to grant scientists access to a wide range of reliable sources and new useful tools that surpass human capabilities.
However, we trust in allowing scientists to determine how to construct their own protocols based on this information, as they are the experts in their field.
Ready to get started?
Sign up for free.
Registration takes 20 seconds.
Available from any computer
No download required
Revolutionizing how scientists
search and build protocols!