The largest database of trusted experimental protocols

18 protocols using advia 2120 hematology analyzer

1

Biochemical Analyses in Clinical Study

Check if the same lab product or an alternative is used in the 5 most similar protocols
All biochemical parameters including acetaminophen plasma level were measured by the certified central laboratories of the Tuebingen University Hospital (Division of Endocrinology, Diabetology, Angiology, Nephrology, Pathobiochemistry and Clinical Chemistry, Department of Internal Medicine, Tuebingen University Hospital, Germany). Arterial albumin, lactate and creatinine (enzymatic) concentrations were determined on the ADVIA 1800 Clinical Chemistry analyzer, ammonia and acetaminophen plasma concentrations were determined on the Dimension RXL Clinical Chemistry analyzer and the ADVIA 2120 Hematology analyzer was used for blood counts (all Siemens Healthcare Diagnostics, Eschborn, Germany). Coagulation tests were performed on the ACL TOP 700 Hemostasis Testing System, (Instrumentation Laboratory, Kirchheim, Germany). Sample analysis was conducted within 1 h of collection at each time point.
+ Open protocol
+ Expand
2

Evaluating SARS-CoV-2 Viral Clearance

Check if the same lab product or an alternative is used in the 5 most similar protocols
Whole blood samples (5 ml) were collected using venipuncture. 3 ml was added to a gel and clot activator tube for separating sera. The remaining 2 ml was placed into an EDTA tube for complete blood cell count including WBCs and lymphocytes. Oropharyngeal and nasopharyngeal swabs were collected for SARS-CoV-2 diagnosis and viral clearance was evaluated by real-time PCR. A questionnaire was provided to all participants asking about their possible exposure to SARS-CoV-2 infection. Complete blood count (CBC) was performed using an Advia 2120 hematology analyzer (Siemens Healthcare).
+ Open protocol
+ Expand
3

Anemia Treatment in Dialysis Patients

Check if the same lab product or an alternative is used in the 5 most similar protocols
Treatment for anemia was provided with a target Hb level of 10–12 g/dL according to the guidelines of the Japanese Society of Dialysis Therapy. The dose of DA was adjusted accordingly. Rox administration was continued at the initial dose according to the package insert, and no iron supplement or iron-containing phosphate adsorbent was used during the observation period.
Rox administration was started 1 week after the last dose of DA. Rox was administered 3 times weekly at each dialysis session. The administered dose was 70 mg in patients who had received DA at doses of < 20 μg/week and 100 mg in those who had received DA at doses of ≥ 20 μg/week, following the directions on the package insert.
Blood samples were collected at the start of HD on the first day of Rox administration (Day 0) and Day 28 to measure mature erythrocytes, reticulocyte indices (Ret count, CHr), iron-related factors, hepcidin levels, and EPO concentration. TSAT was calculated as serum iron concentration divided by total iron-binding capacity multiplied by 100. Erythrocyte lineage cells were counted using an ADVIA2120 hematology analyzer (Siemens Healthcare Diagnostics, Tarrytown, NY), EPO concentration was measured by chemiluminescent enzyme immunoassay, and hepcidin levels were quantitatively measured by liquid chromatography coupled with tandem mass spectrometry [18 (link)].
+ Open protocol
+ Expand
4

Comprehensive Immunophenotyping of Murine Leukocytes

Check if the same lab product or an alternative is used in the 5 most similar protocols
Single-cell suspensions were prepared from the spleen and thymus, and viable leukocytes from 60 d-old mice were determined with a CASY cell counter (Scharfe System GmbH). Blood cell counts were determined using an ADVIA 2120 hematology analyzer (Siemens) and then depleted of red cells by treatment with 0.168 M ammonium chloride before FACS analysis. The composition of leukocyte populations was determined by flow cytometric analysis on a FASCalibur (BD Biosciences) following staining with fluorochrome-labeled surface marker-specific monoclonal antibodies, and data were analyzed using FlowJo version 9.3.2 (TreeStar). The monoclonal antibodies were produced and labeled with fluorescein isothiocyanate, R-phycoerythrin, or allophycocyanin at the Walter and Eliza Hall Institute unless otherwise indicated. Antibody clone numbers were CD4 (YTA3.2.1), CD8 (YTS169), THY-1 (T24.3.21), IgM (5.1), IgD (11-26C), B220 (RA3-6B2), c-Kit (ACK-4), GR-1 (RB6-8C5), MAC-1 (MI/70), CD3 (145-2C11), and B220 (RA3-6B2).
+ Open protocol
+ Expand
5

Histopathological and Biochemical Analysis

Check if the same lab product or an alternative is used in the 5 most similar protocols
For histologic analysis, the excised tumors and main organs of interest (heart, liver, kidneys, and spleen) in formaldehyde (10%) were dehydrated with ethanol, embedded in paraffin, and then slides containing 5 μm sections were prepared. The slides were subsequently stained with hematoxylin and eosin Y solution (H&E) to assess histological alterations via light microscopy conducted by a single blinded pathologist. The blood samples were collected via retro-orbital sinus puncture into no anticoagulant or 3.2% citrate anticoagulant for the analysis of biochemical analytes (renal tests, liver, and muscle enzyme activity) and hemograms, respectively. The analysis was conducted in the Clinical Pathology Laboratory in the Animal Health Diagnostic Center at Cornell University using automated equipment (Hitachi P modular chemistry analyzer, Roche Diagnostics, Indianapolis, IN, USA and ADVIA 2120 hematology analyzer, Siemens Healthcare Diagnostics Inc., Tarrytown, NJ) using manufacturer reagents, with the exception of GLDH (Randox Laboratories Ltd, Antrim, UK).
+ Open protocol
+ Expand
6

RDW Measurement and Periodic Analyzer Comparison

Check if the same lab product or an alternative is used in the 5 most similar protocols
RDW was measured as part of the routine CBC using a Siemens Advia 2120 Hematology Analyzer according to the formula:
RDW=(CoefficientofVariabilityofRBC÷meanMCV)×100
Periodic comparisons between two routinely used identical analyzers were performed as part of the clinical laboratory accreditation requirements. The reference range for RDW in our laboratory is 12.5–16.0%.
+ Open protocol
+ Expand
7

Quantification of Residual Blood Cells

Check if the same lab product or an alternative is used in the 5 most similar protocols
Residual cells were tested in the plasma products prior to pathogen reduction. White blood cells (WBC) and red blood cells (RBC) were quantified using flow cytometry (BD FACSCalibur™ with Trucount™ absolute count tubes, Becton Dickinson Austria GmbH, Wien, Austria). Residual platelets (PLT) were quantified on the ADVIA 2120 Hematology Analyzer (Siemens Healthcare Diagnostics GmbH, Vienna, Austria).
+ Open protocol
+ Expand
8

Assessing Disease Severity in ED Patients

Check if the same lab product or an alternative is used in the 5 most similar protocols
Baseline characteristics, including demographic information and comorbidities, were collected. The Charlson Comorbidity Index was used to assess the burden of chronic disease [26 (link),27 (link)]. For disease severity assessment, both the Acute Physiology and Chronic Health Evaluation II (APACHE II) score and the Sequential Organ Failure Assessment (SOFA) score were determined according to the worst values within the initial 24 hours of ED admission. The SOFA score was calculated from the following parameters: arterial partial pressure of oxygen/fraction of inspired oxygen, platelet count, bilirubin, blood pressure and use of an inotropic agent, Glasgow Coma Scale score, and creatinine level or urine output. In addition, MPV, platelet count, white blood cell (WBC) count, and hemoglobin (Hb) level were measured at initial presentation and at 36 and 72 hours after ED admission. Venous blood samples for laboratory counts were collected from all patients in tubes containing ethylenediamine tetra-acetic acid (EDTA) and analyzed with an Advia 2120 hematology analyzer (Siemens Healthcare Diagnostics, Deerfield, IL) within 30 minutes of sample collection. The normal reference range for MPV in our hospital laboratory is 7.4 to 10.4 fL.
+ Open protocol
+ Expand
9

Blood Sample Collection and Analysis

Check if the same lab product or an alternative is used in the 5 most similar protocols
Blood samples were taken from the submandibular vein by puncture, and blood was stored in MAP microtubes coated with 1 mg EDTA (Becton, Dickinson, Franklin Lakes, NJ). The blood was diluted 1:10 in PBS, and blood cell counting was performed using the Siemens (Munich, Germany) Advia 2120 hematology analyzer. For further confirmation, blood smears were performed, and blood cells were identified and counted microscopically to corroborate the results from the automatic cell counter.
+ Open protocol
+ Expand
10

Comprehensive Biomarker Assessment for HBV

Check if the same lab product or an alternative is used in the 5 most similar protocols
Blood samples were collected at every visit time. Routine blood testing was performed on Siemens ADVIA 2120 Hematology Analyzer. Routine biochemical tests including alanine aminotransferase (ALT), aspartate aminotransferase (AST), gamma-glutamyltransferase (GGT), etc. were measured by automated biochemical technique (Siemens Healthcare Diagnostics, USA). Serum HBV DNA was quantified using the TaqMan polymerase chain reaction (PCR) assay (Sansure Biotech, China) on ABI7500 Real‐Time PCR System (Life Technologies, USA), which has a detection limit of 500 IU/mL. The levels of HBsAg, HBsAb, HBeAg, HBeAb and HBcAb were measured using a commercial chemiluminescent microparticle immunoassay kit with the Architect i4000SR System (Abbott Laboratories, USA).
+ Open protocol
+ Expand

About PubCompare

Our mission is to provide scientists with the largest repository of trustworthy protocols and intelligent analytical tools, thereby offering them extensive information to design robust protocols aimed at minimizing the risk of failures.

We believe that the most crucial aspect is to grant scientists access to a wide range of reliable sources and new useful tools that surpass human capabilities.

However, we trust in allowing scientists to determine how to construct their own protocols based on this information, as they are the experts in their field.

Ready to get started?

Sign up for free.
Registration takes 20 seconds.
Available from any computer
No download required

Sign up now

Revolutionizing how scientists
search and build protocols!