The largest database of trusted experimental protocols

Ge signa 3t scanner

Manufactured by GE Healthcare
Sourced in United States

The GE Signa 3T scanner is a magnetic resonance imaging (MRI) system that operates at a field strength of 3 Tesla. It is designed to provide high-quality imaging for a variety of clinical applications.

Automatically generated - may contain errors

Lab products found in correlation

7 protocols using ge signa 3t scanner

1

Multimodal brain imaging across sedation

Check if the same lab product or an alternative is used in the 5 most similar protocols
Structural and rs-fMRI data were acquired using a whole-body 3T Signa GE scanner (GE Healthcare, Waukesha, WI, USA) with a standard 32-channel transmit-receive head coil. Functional imaging data were acquired during each of four 15-minute scans in wakefulness, light sedation, deep sedation, and recovery, respectively, with repetition time (TR), 2 s; total volumes, 450; echo time, 25 ms; slice thickness, 3.5 mm; in-plane resolution, 3.5 × 3.5 mm; number of slices, 41; flip angle, 77°; field of view, 22.4 cm; matrix size, 64 × 64. High-resolution three-dimensional spoiled gradient-recalled echo axial images were acquired before functional scans with TE/TR/TI, 3.2/8.2/450 ms; slice thickness, 1 mm; 150 slices; flip angle, 12°; field of view, 24 cm; matrix size, 256 × 256.
+ Open protocol
+ Expand
2

Multimodal Brain Imaging in Research

Check if the same lab product or an alternative is used in the 5 most similar protocols
Resting-state structural and fMRI data were acquired using a whole-body 3T Signa GE scanner (GE Healthcare, Waukesha, Wisconsin, USA) with a standard transmit-receive head coil. Functional imaging BOLD signals were obtained during a 7-min scan for each subject using the following sequence parameters: repetition time, 2 s; echo time, 25 ms; total volumes, 210; slice thickness, 4.0 mm; in-plane resolution, 3.75 × 3.75 mm; number of slices, 39; ip angle, 90°; eld of view, 24.0 cm; matrix size, 64 × 64. High-resolution three-dimensional spoiled gradient-recalled echo axial images were acquired before functional scans with TE/TR/TI, 3.2/8.2/450 ms; slice thickness, 1 mm; 188 slices; ip angle, 7°; eld of view, 256 mm; matrix size, 256 × 256.
+ Open protocol
+ Expand
3

3T fMRI Acquisition Protocol

Check if the same lab product or an alternative is used in the 5 most similar protocols
Blood oxygen level-dependent (BOLD) fMRI was performed on a GE Signa 3T scanner (GE Healthcare) equipped with a standard quadrature head coil. A gradient-echo planar imaging sequence (repetition time, 2000 ms; echo time, 30 ms; thickness, 4 mm; gap, 1 mm; flip angle, 90°; field of view, 24 cm; and matrix, 64 × 64) was used to acquire images while the subjects performed the tasks (N-back: 120 volumes for each run, 20 interleaved axial slices; VAC: 300 volumes, 26 interleaved axial slices). The first four scans were discarded to allow for T1 equilibration effects.
+ Open protocol
+ Expand
4

Functional Magnetic Resonance Imaging of Visual Attention

Check if the same lab product or an alternative is used in the 5 most similar protocols
Blood oxygen level-dependent (BOLD) fMRI was performed on a GE Signa 3T scanner (General Electric, Milwaukee, WI) equipped with a standard quadrature head coil. A gradient-echo planar imaging sequence (repetition time: 2000 ms; echo time: 28 ms; 26 interleaved axial slices; thickness: 4 mm; gap: 1 mm; voxel size: 3.75 isotropic; scan repetition: 300; flip angle: 90°; field of view: 24 cm; matrix: 64 × 64) was used to acquire images while subjects performed the VAC task. The first four scans were discarded to allow for signal saturation. Images for each subject were realigned, spatially normalized into the MNI template (12-parameter affine model), and spatially smoothed (10-mm Gaussian filter). After realignment, datasets were also checked for small-motion correction (<2 mm in translation, <1.5° in rotation).
+ Open protocol
+ Expand
5

Subdural Electrode Implantation for Intractable Epilepsy

Check if the same lab product or an alternative is used in the 5 most similar protocols
Prior to the study, all subjects submitted written consent for participating in the study. This study was approved by the Institutional Review Board of the Seoul National University Hospital (IRB No. H-0912-067-034). Five subjects (three females and two males, aged 25–37 years) with intractable epilepsy participated in the present study. All patients underwent implantation of subdural electrodes for clinical purposes. The clinical demography of the patients is presented in Table 1. Computed tomography (CT, Siemens SOMATOM sensation16, Siemens medical solution, Erlangen, Germany) for each subject was carried out before and after implantation of the subdural electrodes. Magnetic resonance images (MRIs, GE Signa 3T scanner, GE medical system, Milwaukee, Wisconsin) were also acquired after the implantation.
+ Open protocol
+ Expand
6

Intracranial EEG and Electrical Stimulation Mapping

Check if the same lab product or an alternative is used in the 5 most similar protocols
All subjects underwent extraoperative intracranial EEG monitoring as well as ESM as part of clinical management [1 (link)], [2 (link)], [20 (link)]. Subdural electrode pairs were stimulated with a pulse-train of 5 s maximum duration, a pulse width of 0.3 ms, a frequency of 50 Hz, and an intensity ranging from 3 to 9 mA. Electrode sites where stimulation consistently induced contralateral body movement of face, hand, and foot, expressive aphasia during auditory naming task, expressive aphasia during visual naming task, receptive aphasia during auditory naming task, speech arrest, visual phosphene (lower-order visual areas), and visual distortion (higher-order visual areas) were defined as eloquent functions of interest. The procedure of ESM recording is described in detail in our previous study [21 (link)].
DWI data were acquired using a GE Signa 3T scanner (GE Healthcare, Milwaukee, WI) equipped with an 8-channel head coil at TR = 12500 ms, TE = 88.7 ms, FOV = 24 cm, 128 × 128 acquisition matrix, contiguous 3 mm slice thickness, 55 isotropic gradient directions with b = 1000 s/mm2, and single b = 0 acquisition. T1-weighted structural images were also acquired using a 3D fast spoiled gradient echo sequence (FSPGR) at TR = 9.12 ms, TE = 3.66 ms, TI = 400 ms, slice thickness = 1.2 mm, and planar resolution = 0.94 × 0.94 mm2.
+ Open protocol
+ Expand
7

Whole-Brain Imaging Protocol for fMRI

Check if the same lab product or an alternative is used in the 5 most similar protocols
Whole-brain imaging data were acquired on a GE-Signa 3-T scanner (General Electric, Milwaukee, WI) at the University of Georgia Bio-Imaging Research Center (birc.uga.edu). A total of 195 functional images were acquired using a gradient echo T2*-weighted echoplanar imaging scan and were obtained using a flip angle of 90°, repetition time = 2.0 s, echo time = 25 ms, 40 slices, and field of view = 220 × 64 mm matrix. For the structural whole-brain images, a three-dimensional highresolution spoiled gradient scan was conducted (repetition time, 24 ms; echo time, 4.5 ms; flip angle, 20°; matrix size, 256 × 256; field of view, 25.6 cm; slice thickness, 1.0 mm; 164 contiguous slices).
+ Open protocol
+ Expand

About PubCompare

Our mission is to provide scientists with the largest repository of trustworthy protocols and intelligent analytical tools, thereby offering them extensive information to design robust protocols aimed at minimizing the risk of failures.

We believe that the most crucial aspect is to grant scientists access to a wide range of reliable sources and new useful tools that surpass human capabilities.

However, we trust in allowing scientists to determine how to construct their own protocols based on this information, as they are the experts in their field.

Ready to get started?

Sign up for free.
Registration takes 20 seconds.
Available from any computer
No download required

Sign up now

Revolutionizing how scientists
search and build protocols!