The largest database of trusted experimental protocols

Mucin

Manufactured by Carl Roth
Sourced in Belgium, Germany

Mucin is a type of glycoprotein found in various biological fluids, such as saliva, respiratory tract secretions, and gastrointestinal tract mucus. It serves as a lubricant and provides a protective barrier against pathogens and harmful substances.

Automatically generated - may contain errors

9 protocols using mucin

1

Cultivation of AIEC LF82 in Nutrient Broth

Check if the same lab product or an alternative is used in the 5 most similar protocols
The ampicillin/erythromycin-resistant AIEC LF82, isolated from a chronic ileal lesion of a CD patient [32 (link)], was used as the AIEC reference strain. AIEC was grown in a nutrient broth at 37 °C under aerobic conditions upon inoculating 1% from a frozen stock stored at −80 °C with 20% (v/v) of glycerol.
Two media were used during fecal batch incubations. In Test 1, the background medium consisted of 5.2 g/L of K2HPO4, 16.3 g/L of KH2PO4, 2.0 g/L of NaHCO3 (Chem-lab NV, Zedelgem, Belgium), 2.0 g/L of Yeast Extract (Oxoid, Aalst, Belgium), 2.0 g/L of pepton (Oxoid, Aalst, Belgium), 1.0 g/L of mucin (Carl Roth, Karlsruhe, Germany), 0.5 g/L of L-cystein, and 2.0 mL/L of Tween80. In Test 2, the concentrated background medium consisted of 7.6 g/L of K2HPO4, 23.9 g/L of KH2PO4, 2.9 g/L of NaHCO3 (Chem-lab NV, Zedelgem, Belgium), 2.9 g/L of Yeast Extract (Oxoid, Aalst, Belgium), 2.9 g/L of pepton (Oxoid, Aalst, Belgium), 1.5 g/L of mucin (Carl Roth, Karlsruhe, Germany), 0.7 g/L of L-cystein, and 2.9 mL/L of Tween80.
+ Open protocol
+ Expand
2

Short-term Colonic Incubations of Healthy Fecal Slurry

Check if the same lab product or an alternative is used in the 5 most similar protocols
Short-term colonic incubations were performed as described in [29 (link)]. Briefly, freshly collected fecal material of a healthy human donor (f, 26) was collected and after preparation of an anaerobic fecal slurry inoculated at 10 vol% in a sugar-depleted nutritional medium containing 5.2 g/L K2HPO4, 16.3 g/L KH2PO4, 2.0 g/L NaHCO3 (Chem-lab NV, Zedelgem, Belgium), 2.0 g/L Yeast Extract, 2.0 g/L pepton (Oxoid, Aalst, Belgium), 1.0 g/L mucin (Carl Roth, Karlsruhe, Germany), 0.5 g/L L-cystein and 2.0 mL/L Tween80 (Sigma–Aldrich, Bornem, Belgium). When mucin-coated carriers were added to the reactors during Test 3, 1.0 g/L mucin was omitted from the nutritional medium. Five mucin-coated carriers were added per reactor after being prepared according to Van den Abbeele et al. (2013) [12 (link)]. Test products were dosed at 5 g/L and reactors were anaerobically incubated at 37 °C for 48 h. All experiments were performed in technical triplicate.
+ Open protocol
+ Expand
3

Short-term colonic fermentation protocol

Check if the same lab product or an alternative is used in the 5 most similar protocols
Short-term colonic fermentations were performed as described recently [18 (link)]. Briefly, colonic background medium containing 5.2 g/L K2HPO4, 16.3 g/L KH2PO4, 2.0 g/L NaHCO3 (Chem-lab NV, Zedelgem, Belgium), 2.0 g/L Yeast Extract, 2.0 g/L pepton (Oxoid, Aalst, Belgium), 1.0 g/L mucin (Carl Roth, Karlsruhe, Germany), 0.5 g/L L-cystein, and 2.0 mL/L Tween80 (Sigma-Aldrich, Bornem, Belgium) was added to incubation reactors (90 vol%), already containing the correct amount of the test products for obtaining a final concentration of 0 g/L (Blank) or 5 g/L (for both AADE and FOS), respectively. The reactors were sealed and anaerobiosis was obtained by flushing with N2. Subsequently, fresh fecal material of a healthy human donor (no history of antibiotic use in the six months preceding the study) was collected (according to the ethical approval of the University Hospital Ghent with reference number B670201836585; 06/08/2018). After preparation of an anaerobic fecal slurry, this was inoculated at 10 vol% in the aforementioned medium. All incubations were performed in biological triplicate for 48 h at 37 °C under anaerobic conditions with continuous shaking (90 rpm).
+ Open protocol
+ Expand
4

Film-Forming Polymer Characterization

Check if the same lab product or an alternative is used in the 5 most similar protocols
SA (AppliChem GmbH, Darmstadt, Germany) (10,000–600,000 g/mol) and HPMC (Pharmacoat® 603, Shin Etsu Chemical Co., Ltd., Tokyo, Japan) were used as a film-forming agent in the polymer film. GLY 85% (w/w %) was added to the film as a plasticizer [Ph. Eur. 8.], CTZ [Ph. Eur. 8.], which was a gift from ExtractumPharma Pharmaceutical Manufacturing, Marketing and Consulting Inc, Kunfehértó, Hungary was the API in the polymer film. Mucin (Carl Roth GmbH + Co. KG, Karlsruhe, Germany) (10 w/w %) dispersion was used in the in vitro mucoadhesion test. Diiodomethane was used in the surface free energy measurement.
+ Open protocol
+ Expand
5

Synthetic Gut Bead Model for Microbiome

Check if the same lab product or an alternative is used in the 5 most similar protocols
mucin-alginate beads were used for small intestinal simulations and prepared by dripping a 5×-boiled mucin-alginate solution [50 g L−1 mucin (Carl Roth), 12 g L−1 agar (VWR), 12 g L−1 alginate (Carl Roth) and 2.22 ml L−1 10 M NaOH (Chem-Lab)] into crosslinking solution containing 7.6 g L−1 CaCl2.2H2O (VWR). This approach was implemented as the small alginate beads allowed for sterile sampling of colonized beads and addition of fresh beads via a 50 ml-syringe with catheter tip (Novolab) connected to an inlet port. Sterility of such handlings was a prerequisite as one worked with a synthetic consortium in multiple ileal simulations. In contrast, for the colonic microbiota, the conventional approach using mucin-covered microcosms was used as previously described by Van den Abbeele et al. (2012) (link). A buffer comprising (g L−1) K2HPO4 (8.8; Chem-Lab) and KH2PO4 (6.8; Chem-Lab) was used to rinse luminal content from mucosal samples. Half of the mucus-alginate beads and mucin-covered microcosms were replaced every 2 days.
+ Open protocol
+ Expand
6

Chitosan-Based Polymer Film Formulation

Check if the same lab product or an alternative is used in the 5 most similar protocols
The polymer on which the film was based was Chitosan 80/1000 (Chitoscience Chitosan, HEPPE MEDICAL CHITOSAN GmbH, Halle, Germany), with a degree of 77.6–82.5% deacetylation and apparent viscosity of 751–1250 mPas (1% in 1% acetic acid, 20 °C). Ascorbic acid (Ph. Eur.) was used in the film as an excipient to provide acidic pH and permeation enhancement. Glycerol (Ph. Eur.) was used as a plasticizer. Acetic acid (min. 99.8%, Sigma-Aldrich, Darmstadt, Germany) provided the appropriate acidic environment for dissolution during the preparation of the reference films. Distilled water was present in the compositions as a dissolving medium. Mucin (Carl Roth GmbH + Co. KG, Karlsruhe, Germany) (10 w/w%) dispersion was used in the in vitro mucoadhesion test. It was isolated from the porcine stomach lining (data from the producer). Diiodomethane was used in the surface free energy measurement. Diclofenac sodium (diclofenac Na) and cetirizine dihydrochloride (cetirizine HCl) (Ph. Eur. 8.) were applied as an active ingredient in the polymer films. Phosphate buffer pH 6.8 was used for dissolution testing.
+ Open protocol
+ Expand
7

Colonic Fermentation of Pectin Derivatives

Check if the same lab product or an alternative is used in the 5 most similar protocols
Short-term colonic incubations were performed as described in [31 (link)]. Briefly, fresh fecal material from a healthy human donor (f, 26y) was collected and after preparation of an anaerobic fecal slurry inoculated at 10 vol% in a sugar-depleted nutritional medium containing 5.2 g/L K2HPO4, 16.3 g/L KH2PO4, 2.0 g/L NaHCO3 (Chem-lab NV, Zedelgem, Belgium), 2.0 g/L yeast extract, 2.0 g/L pepton (Oxoid, Aalst, Belgium), 1.0 g/L mucin (Carl Roth, Karlsruhe, Germany), 0.5 g/L L-cystein and 2.0 mL/L Tween80 (Sigma–Aldrich, Bornem, Belgium). Test products (bpRG-I and cRG-I) were dosed at 5 g/L and reactors were anaerobically incubated at 37 °C for 48 h. The base medium with no addition of test product and inoculated by the fecal slurry was used as the negative control (blank). All experiments were performed in technical triplicate.
+ Open protocol
+ Expand
8

Polymer Film for Enhanced Mucoadhesion and Permeation

Check if the same lab product or an alternative is used in the 5 most similar protocols
Sodium alginate (SA) (Biochemica GmbH, Darmstadt, Germany) (10,000–600,000 g/mol) and hydroxy methylcellulose (HPMC) (Pharmacoat® 603, Shin Etsu Chemical Co., Ltd., Tokyo, Japan) were used as film-forming agents in the polymer film. Glycerol (GLY) 85% (w/w %) was added to the film as a plasticizer (Ph. Eur.8.). Citric acid (CA) (Ph. Eur. 8.) was incorporated in the polymer film system as a permeation enhancer. Cetirizine dihydrochloride (CTZ) (Ph. Eur. 8.) was the API, which was a gift from ExtractumPharma Pharmaceutical Manufacturing, Marketing and Consulting Inc., Kunfehértó, Hungary. Mucin (Carl Roth GmbH + Co. KG, Karlsruhe, Germany) (10 w/w %) dispersion was used in the in vitro mucoadhesion test.
+ Open protocol
+ Expand
9

Characterization of ZnO Nanoparticles in Synthetic Saliva

Check if the same lab product or an alternative is used in the 5 most similar protocols
ZnO nanoparticles (material code JRCNM01100a, also known as NM110) were procured from the repository of the Joint Research Centre of the European Commission (Ispra, Italy), as one of the FP-7 NANoREG panel of representative nanomaterials. A summary of the physicochemical characterization data is included in the Supporting Information (SI).
Dissolved Zn solutions were prepared from a 1000 mg•L -1 standard solution (Certipur® Single-element ICP standard from Merck KGaA, Darmstadt, Germany). The composition of the synthetic saliva solutions is based on a recent in vitro human gastrointestinal model, 39 according to the recipe listed in Table 1: saliva I (containing only the inorganic components) and saliva II (with both organic and inorganic components). All reagents within the synthetic saliva were purchased from Sigma-Aldrich Inc. (St. Louis, MO, USA) except mucin (from Carl Roth Gmbh & Co. KG, Karlsruhe, Germany).
+ Open protocol
+ Expand

About PubCompare

Our mission is to provide scientists with the largest repository of trustworthy protocols and intelligent analytical tools, thereby offering them extensive information to design robust protocols aimed at minimizing the risk of failures.

We believe that the most crucial aspect is to grant scientists access to a wide range of reliable sources and new useful tools that surpass human capabilities.

However, we trust in allowing scientists to determine how to construct their own protocols based on this information, as they are the experts in their field.

Ready to get started?

Sign up for free.
Registration takes 20 seconds.
Available from any computer
No download required

Sign up now

Revolutionizing how scientists
search and build protocols!