The largest database of trusted experimental protocols

4 protocols using n n dimethylacetamide

1

Fabrication of Photoactive Polymer Membranes

Check if the same lab product or an alternative is used in the 5 most similar protocols
4,4′-Diaminodiphenyl ether (ODA) (98%), 2,2-bis[4-(3,4-dicarboxyphenoxy)phenyl]propane dianhydride (BPADA), 4,4′-(hexafluoroisopropylidene)diphthalic anhydride (6FDA, 98%) were purchased from Energy Chemical (Saan Chemical Technology Co., Ltd., Shanghai, China). 1,3,5-tris(4-(2-trifluoromethyl-4-aminophenoxy)phenyl) benzene (TTFAPOPB) was synthesized by ourselves. Methylene blue trihydrate (BS), TiO2 (99.8% metals basis, 25 nm), N-methyl-2-pyrrolidone (NMP), and N,N-dimethylacetamide (DMAC) were purchased from Tokyo Chemical Industry (TCI Development Co., Ltd., Shanghai, China).
+ Open protocol
+ Expand
2

Synthesis of Furan-based Polymers

Check if the same lab product or an alternative is used in the 5 most similar protocols
Glycolic acid (GA), thionyl chloride (SOCl2), 1,4-butanediol (BD), adipic acid (AA), 2,5-furandicarboxylic acid (FDCA), and N,N-dimethylacetamide (DMAc) were purchased from Tokyo Chemical Industry Co. Potassium hydrogen carbonate and o-dichlorobenzene (ODCB) were purchased from Wako Pure Chemical Industries, Ltd. N,N-Dimethylformamide (DMF), 1,1,2,2-tetrachloroethane (TCE), pyridine, acetone, chloroform, methanol, THF, dimethyl sulfoxide (DMSO), and sulfuric acid (H2SO4) were purchased from Kanto Chemical Co., Inc (Tokyo Japan). 1,3-Dibromopropane (DBP), terephthaloyl dichloride (TC), and adipoyl dichloride (AC) were purchased from Tokyo Chemical Industry Co. (Tokyo Japan). 1,4-Dibromobutane, and poly(Glycolic acid) (PGA) were purchased from Sigma-Aldrich, Inc. (St. Louis, MO, USA) Poly(butylene furanoate) (PBF) [17 (link)] and poly(butylene adipate) (PBA) [18 (link)] were prepared according to the literatures. 2,5-Furandicarbonyl dichloride (FC) was prepared from the reaction of FDCA with SOCl2 according to the literature [19 (link)].
+ Open protocol
+ Expand
3

Synthesis and Purification of Aromatic Diamines

Check if the same lab product or an alternative is used in the 5 most similar protocols
Pyromellitic dianhydride (PMDA) was purchased from Shijiazhuang HOPE Chem. Co. Ltd. (Shijiazhuang, China) and dried at 180 °C in vacuum for 24 h prior to use. APBI was purchased from Changzhou Sunlight Pharmaceutical Co. Ltd. (Changzhou, China) and recrystallized from absolute ethanol and discolored with active charcoal powder before use. N-methyl-2-pyrrolidone (NMP), N,N-dimethylacetamide (DMAc), and other solvents were obtained from Tokyo Chemical Industry Co., Ltd. (Tokyo, Japan) and purified by distillation prior to use.
4,4′-Iminodianiline (NDA) was synthesized in our laboratory [26 (link)] and purified by recrystallization from absolute ethanol under the protection of high-purity nitrogen. Pure NDA diamine was obtained as colorless needles with the purity of 99.5% according to the gas chromatography analysis. It tends to discolor with the exposure of visible light or storage in air, especially staying in good solvents, such as NMP and DMAc. However, it is very stable and can maintain the colorless state for years if it is stored in an inert and dark place.
+ Open protocol
+ Expand
4

Synthesis of Benzophenonetetracarboxylic Dianhydride Polymer

Check if the same lab product or an alternative is used in the 5 most similar protocols
3,3’,4,4’-Benzophenonetetracarboxylic dianhydride (BTDA) was purchased from Evonik Degussa Corp. (Los Angeles, CA, USA) and dried in vacuo for 24 h at 180 °C prior to use. The aromatic diamine, α,α-bis-(4-amino-3,5-dimethylphenyl)phenylmethane (PTMDA) was synthesized in our laboratory according to the literature [24 (link)]. High purity solvents including N-methyl-2-pyrrolidinone (NMP) and N,N-dimethylacetamide (DMAc) were all purchased from Tokyo Chemical Industry (Tokyo, Japan) and further purified by distillation prior to use. The other commercially available reagents were used without further purification.
The high-pressure mercury lamp (power: 100W) with the maximum emitting wavelength of 365 nm was purchase from BILON Company (Shanghai, China) and equipped with a quartz cold trap.
+ Open protocol
+ Expand

About PubCompare

Our mission is to provide scientists with the largest repository of trustworthy protocols and intelligent analytical tools, thereby offering them extensive information to design robust protocols aimed at minimizing the risk of failures.

We believe that the most crucial aspect is to grant scientists access to a wide range of reliable sources and new useful tools that surpass human capabilities.

However, we trust in allowing scientists to determine how to construct their own protocols based on this information, as they are the experts in their field.

Ready to get started?

Sign up for free.
Registration takes 20 seconds.
Available from any computer
No download required

Sign up now

Revolutionizing how scientists
search and build protocols!