The PSU support sheets were prepared by dissolving polysulfone pellets (PSU, MW = 35,000, Sigma-Aldrich) in DMF solvent. The chemicals for the IP, m-phenylenediamine (MPD, ≥99%) and trimesoyl chloride (TMC, ≥98.5%), were purchased from Fisher Scientific (Pittsburgh, PA, USA) and Sigma Aldrich, respectively. 2,2,4-trimethylpentane (isooctane, 99%) was obtained from Fisher Scientific and used as TMC solvent. Our recent study demonstrated that isooctane could replace commonly used hexane during the IP process as a more environmental-friendly solvent [18 (link)]. Millipore DI water (Synergy185, 18.2 MΩ-cm, EMD Millipore Corp., Billerica, MA, USA) was used to prepare MPD solution and for cleaning purposes. Calcium chloride (CaCl2) and sodium chloride (NaCl) were obtained from Fisher Scientific and Sigma Aldrich, respectively. CSA/TEA salt materials, triethylamine (TEA, ≥99%) and (1s)-(+)-10-camphorsulfonic acid (CSA, 99%), were purchased from Sigma Aldrich.
Synthesis of MOF-based Nanocomposites
The PSU support sheets were prepared by dissolving polysulfone pellets (PSU, MW = 35,000, Sigma-Aldrich) in DMF solvent. The chemicals for the IP, m-phenylenediamine (MPD, ≥99%) and trimesoyl chloride (TMC, ≥98.5%), were purchased from Fisher Scientific (Pittsburgh, PA, USA) and Sigma Aldrich, respectively. 2,2,4-trimethylpentane (isooctane, 99%) was obtained from Fisher Scientific and used as TMC solvent. Our recent study demonstrated that isooctane could replace commonly used hexane during the IP process as a more environmental-friendly solvent [18 (link)]. Millipore DI water (Synergy185, 18.2 MΩ-cm, EMD Millipore Corp., Billerica, MA, USA) was used to prepare MPD solution and for cleaning purposes. Calcium chloride (CaCl2) and sodium chloride (NaCl) were obtained from Fisher Scientific and Sigma Aldrich, respectively. CSA/TEA salt materials, triethylamine (TEA, ≥99%) and (1s)-(+)-10-camphorsulfonic acid (CSA, 99%), were purchased from Sigma Aldrich.
Corresponding Organization :
Other organizations : University of Missouri, Northern Technical University
Variable analysis
- Zirconium (IV) chloride (ZrCl4, 99.5%)
- Titanium (IV) isopropoxide (Ti [OCH(CH3)2]4, 97%)
- 1,4-benzenedicarboxylic acid (BDC, 98%)
- Polysulfone pellets (PSU, MW = 35,000)
- M-phenylenediamine (MPD, ≥99%)
- Trimesoyl chloride (TMC, ≥98.5%)
- 2,2,4-trimethylpentane (isooctane, 99%)
- Calcium chloride (CaCl2)
- Sodium chloride (NaCl)
- Triethylamine (TEA, ≥99%)
- (1s)-(+)-10-camphorsulfonic acid (CSA, 99%)
- Preparation of MOFs NPs
- Characteristics of PSU support sheets
- Performance of IP process
- Dimethylformamide (DMF, 99.9%)
- Methanol (CH3OH, 99.8%)
- Millipore DI water (18.2 MΩ-cm)
Annotations
Based on most similar protocols
As authors may omit details in methods from publication, our AI will look for missing critical information across the 5 most similar protocols.
About PubCompare
Our mission is to provide scientists with the largest repository of trustworthy protocols and intelligent analytical tools, thereby offering them extensive information to design robust protocols aimed at minimizing the risk of failures.
We believe that the most crucial aspect is to grant scientists access to a wide range of reliable sources and new useful tools that surpass human capabilities.
However, we trust in allowing scientists to determine how to construct their own protocols based on this information, as they are the experts in their field.
Ready to get started?
Sign up for free.
Registration takes 20 seconds.
Available from any computer
No download required
Revolutionizing how scientists
search and build protocols!